Port configuration, Displaying connection status, Port configuration -88 – SMC Networks TIGERSWITCH SMC6752AL2 User Manual
Page 135: Displaying connection status -88, Field attributes (web)
P
ORT
C
ONFIGURATION
3-87
CLI – This example assigns an IP and MAC access list to port 1, and an IP
access list to port 3.
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to display
the current connection status, including link state, speed/duplex mode,
flow control, and auto-negotiation.
Field Attributes (Web)
•
Name – Interface label.
•
Type – Indicates the port type. (100BASE-TX, 1000BASE-T, or SFP)
•
Admin Status – Shows if the interface is enabled or disabled.
•
Oper Status – Indicates if the link is Up or Down.
•
Speed Duplex Status – Shows the current speed and duplex mode.
(Auto, or fixed choice)
•
Flow Control Status – Indicates the type of flow control currently in
use. (IEEE 802.3x, Back-Pressure or None)
•
Autonegotiation – Shows if auto-negotiation is enabled or disabled.
•
Trunk Member
5
– Shows if port is a trunk member.
•
Creation
6
– Shows if a trunk is manually configured or dynamically set
via LACP.
Console(config)#interface ethernet 1/1
Console(config-if)#ip access-group david in
Console(config-if)#mac access-group jerry in
Console(config-if)#exit
Console(config)#interface ethernet 1/3
Console(config-if)#ip access-group david in
Console(config-if)#
5. Port Information only.
6. Trunk Information only.