SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 354)

C
OMMAND
L
INE
I
NTERFACE
4-114
show dot1x
This command shows general port authentication related settings on the
switch or a specific interface.
Syntax
show dot1x [statistics] [interface interface]
• statistics - Displays dot1x status for each port.
• interface
• ethernet unit/port
-unit - Stack unit. (This is unit 1)
-port - Port number. (Range: 1-52)
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Shows whether or not 802.1X port
authentication is globally enabled on the switch.
• 802.1X Port Summary – Displays the port access control parameters
for each interface, including the following items:
- Status – Administrative state for port access control.
- Operation Mode– Dot1x port control operation mode (page 4-110).
- Mode
– Dot1x port control mode (page 4-109).
- Authorized – Authorization status (yes or n/a - not
authorized).
• 802.1X Port Details – Displays the port access control parameters
for each interface, including the following items:
- reauth-enabled – Periodic re-authentication (page 4-111).
- reauth-period
– Time after which a connected client must be
re-authenticated (page 4-112).
- quiet-period – Time a port waits after Max Request Count is
exceeded before attempting to acquire a new
client (page 4-112).