SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 85)

B
ASIC
C
ONFIGURATION
3-37
Web – Click System, Log, Remote Logs. To add an IP address to the Host
IP List, type the new IP address in the Host IP Address box, and then click
Add. To delete an IP address, click the entry in the Host IP List, and then
click Remove.
Figure 3-16 Remote Logs
CLI – Enter the syslog server host IP address, choose the facility type and
set the logging trap.
Console(config)#logging host 192.168.1.15 4-61
Console(config)#logging facility 23 4-62
Console(config)#logging trap 4 4-63
Console(config)#end
Console#show logging trap
4-63
Syslog logging: Enabled
REMOTELOG status: Enabled
REMOTELOG facility type: local use 7
REMOTELOG level type: Informational messages only
REMOTELOG server ip address: 192.168.1.15
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
Console#