SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 451)

VLAN C
OMMANDS
4-211
private-vlan
Use this command to create a primary, isolated or community private
VLAN. Use the no form to remove the specified private VLAN.
Syntax
private-vlan vlan-id {community | primary | isolated}
no private-vlan vlan-id
• vlan-id - ID of private VLAN. (Range: 1-4094, no leading zeroes).
• community - A VLAN in which traffic is restricted to port
members.
• primary - A VLAN which can contain one or more community
VLANs, and serves to channel traffic between community
VLANs and other locations.
• isolated – Specifies an isolated VLAN. Ports assigned to an
isolated VLAN can only communicate with promiscuous ports
within their own VLAN.
Default Setting
None
Command Mode
VLAN Configuration
Command Usage
• Private VLANs are used to restrict traffic to ports within the same
VLAN “community,” and channel traffic passing outside the
community through promiscuous ports that have been mapped to the
associated “primary” VLAN.
• Port membership for private VLANs is static. Once a port has been
assigned to a private VLAN, it cannot be dynamically moved to
another VLAN via GVRP.
• Private VLAN ports cannot be set to trunked mode. (See “switchport
mode” on page 4-202.)