SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 305)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-65
Default Setting
None
Command Mode
Privileged Exec
Example
The following example shows that system logging is enabled, the message
level for flash memory is “errors” (i.e., default level 3 - 0), the message
level for RAM is “informational” (i.e., default level 6 - 0).
Console#show logging flash
Syslog logging: Enabled
History logging in FLASH: level errors
Console#show logging ram
Syslog logging: Enabled
History logging in RAM: level informational
Console#
Table 4-19 show logging flash/ram - display description
Field Description
Syslog logging Shows if system logging has been enabled via the logging on
command.
History logging in
FLASH The message level(s) reported based on the logging history
command.
History logging in
RAM The message level(s) reported based on the logging history
command.