SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 283)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-43
• A padlock icon should appear in the status bar for Internet Explorer
5.x and Netscape Navigator 6.2 or later versions.
• The following web browsers and operating systems currently support
HTTPS:
• To specify a secure-site certificate, see “Replacing the Default
Secure-site Certificate” on page 4-56. Also refer to the copy command
on page 4-87.
Example
Related Commands
ip http secure-port (4-43)
copy tftp https-certificate (4-87)
ip http secure-port
This command specifies the UDP port number used for HTTPS/SSL
connection to the switch’s web interface. Use the no form to restore the
default port.
Syntax
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS/SSL.
(Range: 1-65535)
Default Setting
443
Table 4-13 HTTPS System Support
Web Browser Operating System
Internet Explorer 5.0 or later Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP
Netscape Navigator 6.2 or later Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP,
Solaris 2.6
Console(config)#ip http secure-server
Console(config)#