SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 148)

C
ONFIGURING THE
S
WITCH
3-100
Web – Click Port, LACP, Aggregation Port. Set the System Priority, Admin
Key, and Port Priority for the Port Actor. You can optionally configure
these settings for the Port Partner. (Be aware that these settings only affect
the administrative state of the partner, and will not take effect until the
next time an aggregate link is formed with this device.) After you have
completed setting the port LACP parameters, click Apply.
Figure 3-44 LACP - Aggregation Port