SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 334)

C
OMMAND
L
INE
I
NTERFACE
4-94
Example
Related Commands
dir (4-91)
whichboot (4-92)
Authentication Commands
You can configure this switch to authenticate users logging into the system
for management access using local or RADIUS authentication methods.
You can also enable port-based authentication for network client access
using IEEE 802.1X.
Authentication Sequence
Console(config)#boot system config: startup
Console(config)#
Table 4-27 Authentication Commands
Command Group Function Page
Authentication
Sequence Defines logon authentication method and
precedence 4-94
RADIUS Client Configures settings for authentication via a
RADIUS server 4-97
TACACS+ Client Configures settings for authentication via a
TACACS+ server 4-102
Port Security Configures secure addresses for a port 4-104
Port Authentication Configures host authentication on specific ports
using 802.1X
4-107
Table 4-28 Authentication Sequence
Command Function Mode Page
authentication login Defines logon authentication method and
precedence GC 4-95
authentication enable Defines the authentication method and
precedence for command mode change
GC 4-96