SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 218)

C
ONFIGURING THE
S
WITCH
3-170
The priority levels recommended in the IEEE 802.1p standard for various
network applications are shown in the following table. However, you can
map the priority levels to the switch’s output queues in any way that
benefits application traffic for your own network.
Command Attributes
• Priority – CoS value. (Range: 0-7, where 7 is the highest priority)
• Traffic Class 14 – Output queue buffer. (Range: 0-3, where 3 is the
highest CoS priority queue)
Table 3-11 CoS Priority Levels
Priority Level Traffic Type
1 Background
2 (Spare)
0 (default) Best Effort
3 Excellent Effort
4 Controlled Load
5 Video, less than 100 milliseconds latency and jitter
6 Voice, less than 10 milliseconds latency and jitter
7 Network Control
14. CLI shows Queue ID.