SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 277)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-37
Command Usage
• You cannot set a null password. You will have to enter a password to
change the command mode from Normal Exec to Privileged Exec
with the enable command (page 4-27).
• The encrypted password is required for compatibility with legacy
password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP server. There is no need for you to
manually configure encrypted passwords.
Example
Related Commands
enable (4-27)
authentication enable (4-96)
IP Filter Commands
Console(config)#enable password level 15 0 admin
Console(config)#
Table 4-11 IP Filter Commands
Command Function Mode Page
management Configures IP addresses that are allowed
management access GC 4-38
show management Displays the switch to be monitored or
configured from a browser
PE 4-39