SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 418)

C
OMMAND
L
INE
I
NTERFACE
4-178
Address Table Commands
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
Console#show lacp sysid
Port Channel System Priority System MAC Address
-------------------------------------------------------------------
1 32768 00-30-F1-D3-26-00
2 32768 00-30-F1-D3-26-00
3 32768 00-30-F1-D3-26-00
4 32768 00-30-F1-D3-26-00
Console#
Table 4-48 show lacp sysid - display description
Field Description
Channel group A link aggregation group configured on this switch.
System Priority * LACP system priority for this channel group.
System MAC
Address
*
System MAC address.
* The LACP system priority and system MAC address are concatenated to form the LAG system ID.
Table 4-49 Address Table Commands
Command Function Mode Page
mac-address-table
static Maps a static address to a port in a VLAN GC 4-179
clear
mac-address-table
dynamic Removes any learned entries from the
forwarding database PE 4-180
show
mac-address-table Displays entries in the bridge-forwarding
database PE 4-180
mac-address-table
aging-time Sets the aging time of the address table GC 4-181
show
mac-address-table
aging-time Shows the aging time for the address table PE 4-182