SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 457)

GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
4-217
GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register VLAN
members on interfaces across the network. This section describes how to
enable GVRP for individual interfaces and globally for the switch, as well
as how to display default configuration settings for the Bridge Extension
MIB.
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to
disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Table 4-56 GVRP and Bridge Extension Commands
Command Function Mode Page
bridge-ext gvrp Enables GVRP globally for the
switch GC 4-217
show bridge-ext Shows the global bridge extension
configuration PE 4-218
switchport gvrp Enables GVRP for an interface IC 4-219
switchport forbidden vlan Configures forbidden VLANs for an
interface
IC 4-207
show gvrp configuration Displays GVRP configuration for
the selected interface NE,
PE 4-219
garp timer Sets the GARP timer for the selected
function IC 4-220
show garp timer Shows the GARP timer for the
selected function NE,
PE 4-221