SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 367)

A
CCESS
C
ONTROL
L
IST
C
OMMANDS
4-127
Command Mode
Interface Configuration (Ethernet)
Command Usage
A packet matching a rule within the specified ACL is mapped to one of
the output queues as shown in the following table. For information on
mapping the CoS values to output queues, see queue cos-map on
page 4-226.
Example
Related Commands
queue cos-map (4-226)
show map access-list ip (4-127)
show map access-list ip
This command shows the CoS value mapped to an IP ACL for the current
interface. (The CoS value determines the output queue for packets
matching an ACL rule.)
Syntax
show map access-list ip [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Exec
Table 4-35 Egress Queue Priority Mapping
Queue 0 1 2 3
Priority 1,2 0,3 4,5 6,7
Console(config)#interface ethernet 1/25
Console(config-if)#map access-list ip david cos 0
Console(config-if)#