SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 29)

D
ESCRIPTION OF
S
OFTWARE
F
EATURES
1-3
Configuration Backup and Restore – You can save the current
configuration settings to a file on a TFTP server, and later download this
file to restore the switch configuration settings.
Authentication – This switch authenticates management access via the
console port, Telnet or web browser. User names and passwords can be
configured locally or can be verified via a remote authentication server (i.e.,
RADIUS or TACACS+). Port-based authentication is also supported via
the IEEE 802.1X protocol. This protocol uses the Extensible
Authentication Protocol over LANs (EAPOL) to request user credentials
from the 802.1X client, and then verifies the client’s right to access the
network via an authentication server.
Other authentication options include HTTPS for secure management
access via the web, SSH for secure management access over a
Telnet-equivalent connection, IP address filtering for SNMP/web/Telnet
management access, and MAC address filtering for port access.
Access Control Lists – ACLs provide packet filtering for IP frames
(based on address, protocol, TCP/UDP port number or TCP control
code) or any frames (based on MAC address or Ethernet type). ACLs can
be used to improve performance by blocking unnecessary network traffic
or to implement security controls by restricting access to specific network
resources or protocols.
Port Configuration – You can manually configure the speed, duplex
mode, and flow control used on specific ports, or use auto-negotiation to
detect the connection settings used by the attached device. Use the
full-duplex mode on ports whenever possible to double the throughput of
switch connections. Flow control should also be enabled to control
network traffic during periods of congestion and prevent the loss of
packets when port buffer thresholds are exceeded. The switch supports
flow control based on the IEEE 802.3x standard.