SMC Networks TIGERSWITCH SMC6752AL2 - Manual (Page 210)

C
ONFIGURING THE
S
WITCH
3-162
CLI – This example configures VLAN 5 as a primary VLAN, and VLAN
6 as a community VLAN and VLAN 7 as an isolated VLAN.
Associating VLANs
Each community or isolated VLAN must be associated with a primary
VLAN.
Command Attributes
• Primary VLAN ID – ID of primary VLAN (1-4094).
• Association – Community or isolated VLANs associated with the
selected primary VLAN.
• Non-Association – Community or isolated VLANs not associated
with the selected primary VLAN.
Web – Click VLAN, Private VLAN, Association. Select the required
primary VLAN from the scroll-down box, highlight one or more
community VLANs in the Non-Association list box, and click Add to
associate these entries with the selected primary VLAN. (A community
VLAN can only be associated with one primary VLAN.)
Figure 3-69 Private VLAN Association
Console(config)#vlan database 4-198
Console(config-vlan)#private-vlan 5 primary 4-211
Console(config-vlan)#private-vlan 6 community
Console(config-vlan)#private-vlan 7 isolated
Console(config-vlan)#