Samsung SCX-6320F - Manual (Page 132)

M
AINTENANCE
7.9
7
6 Close the front cover and the side cover.
7 The machine returns to Standby mode.
N OTE : If you do not reset the counter, “Drum Warning” or “Drum
Empty” may appear before the current drum cartridge’s time is up.
Checking the Serial Number
1
Press Menu until “Sys. Admin Tools” displays on the top
line. Or, press Menu and 0 using the number keypad to
display “Sys. Admin Tools”. If the menu is protected by a
password, you need to enter the password.
2 Press the scroll buttons until “Maintenance” displays on the
bottom line and then press Enter.
3
Press the scroll buttons until “Serial Number” displays on
the bottom line and then press Enter. You can check the
serial number of this machine.
4 To return to the idle mode, press Stop/Clear.
Adjusting Shading
If the scanning unit becomes dirty, it can alter the shading
value. If your print has black lines or is blurred, adjust the
shading settings.
1 Load a sheet of white paper on the scan glass.
2 Press Menu until “Sys. Admin Tools” displays on the top
line. Or, press Menu and 0 using the number keypad to
display “Sys. Admin Tools”. If the menu is protected by a
password, you need to enter the password.