Samsung SCX-6320F - Manual (Page 265)

A UTOMATIC D IALLING 4.3
4
Storing a Number Using the One-touch Dial
Buttons on the E-mail Keyboard
1 Make sure that the machine is in the fax idle mode. If
necessary, press Fax to enter the fax idle mode.
2 Enter the number you want to store by using the number
keypad and then press the one-touch dial button on the E-
mail keyboard.
Or, press and hold the one-touch dial button you want to
and enter the number.
3 Press Enter to save the number.
4 To assign a name to the number, enter the desired name
using the E-mail keyboard.
Or,
If you do not want to assign a name, skip this step.
5 Press Enter when the name appears correctly or without
entering a name.
6 To store more telephone numbers, repeat steps 2 through
3.
Or
To return to Standby mode, press Stop/Clear .
Sending a Fax using a One-Touch Number
1 Load the document you want to send in the Duplex
Automatic Document Feeder (DADF) or on the scan glass.
See “Loading Document(s) for Faxing” on page 2.3.
2 Make sure that the machine is in the fax idle mode. If
necessary, press Fax to enter the fax idle mode.
3 You can use Resolution, Original Type, Darkness and/or
Duplex
to choose the appropriate sending condition for the
document. For details, see “Adjusting the Document
Settings” on page 2.6.
4 Press the one-touch dial button where you stored a number.