Samsung SCX-6320F - Manual (Page 45)

I NSTALLING S OFTWARE
2.4
Installing Samsung Software
N OTES :
• For Windows 95/98/Me/NT 4.0/2000/XP users, cancel the “Found
New Hardware Wizard” screen when the computer boots up.
• Make sure that your machine is plugged in and connected to your
computer’s parallel port or USB port before installing
software from the CD. Windows 95 and Windows NT 4.0 do not
support USB connection.
1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and the opening
window appear.
If the installation window does not appear, click Start, and
then Run. Type X:Setup.exe, replacing “X” with the letter
of your drive, and click OK.
2
If the following window opens, connect your machine to the
computer and turn the printer on. Then click Next.
If the machine is already connected and turned on, this
screen does not appear. Skip to the next step.
N OTE : If you click Next and the machine is not connected to the
machine, an alert message window appears. After connecting the
machine and turning it on, click Yes . Or, if you want to install the
software without the machine, Click No .