Samsung SCX-6320F - Manual (Page 244)

G ETTING STARTED
1.4
Setting Machine ID
In some countries it is required by law to indicate the fax
number on any fax sent. The machine ID containing the
telephone number and a name, will be printed at the top of each
page sent from the machine. To set the Machine ID, take the
following steps:
1 Press Menu until “Machine Setup” appears on the top line
of the display.
2 The first item, “Machine ID”, appears on the bottom line of
the display and then press Enter to enter the selected
menu.
3 Enter the fax telephone number and press Enter.
4 Enter the ID and press Enter.
If a number or ID has already been entered it is displayed.
Press the left scroll button to delete the current entry and
enter the correct one.
5 To return to Standby mode, press Stop/Clear.
7
C
O
P
Y
Used to adjust contrast level prior to
copying, Faxing or scanning.
Used to adjust copy size from 25% to 400%
when using the Document Glass, and 25%
to 100% using the DADF.
Used to make two-sided copies in Copy
mode.
Used to produce collated copies in Copy
mode.
Used to use select the original type of
original being scanned.
Used to use special copy features like
Clone, Auto fit, 2 Up, Poster and ID card.