Samsung SCX-6320F - Manual (Page 148)

8
T
ROUBLESHOOTING
8.7
Fuser Area
If the paper jammed in the fuser area, “Paper Jam 1” appears
on the display:
N OTE : The fuser area is hot. Take care when removing paper from
the machine.
1 Lift the release lever to open the side cover.
2 Pull down on the fuser lever as shown below.
This will release pressure on the paper.
If paper is not seen in this area, skip to the Exit Area.
N OTE : Do not pull paper up through the fusing unit. Unfused
toner may adhere to the area, resulting in smudged copies.
3 Remove the jammed paper, in the direction shown.