Samsung SCX-6320F - Manual (Page 221)

I NSTALLING O PTIONS
D.12
Configuring the Samsung Network
Printer Port
The supplied network programme installation CD-ROM contains
Samsung Network Printer Port for using Windows networks. You
can install the port with the network administration programme.
Before installing the Samsung Network Printer port, you need to
install the MFP driver on your system if it is not already installed.
See page page 2.4.
Installing Samsung Network Printer Port
1 Insert the installation CD supplied with your network
interface card into the CD-ROM drive.
2 The language selection window automatically opens. Select
a language.
If the SyncThru setup does not start automatically, if the
opening window does not appear, click Start, and then
Run. Type X:CDSetup.exe, replacing “X” with the letter of
your drive, and click OK.
3 Click SyncThru.
4 Click Install Samsung Software on your PC.
5 In the Welcome window, click Next.
6 The Chooser Destination Location window appears. You may
select the program folder. Or click Next to install it in the
default folder.
7 When the Setup Type window appears, select Compact and
click Next.
8 When the installation is complete, click Finish.