Basic start-up operations, With the handset making a call, Answering a call – Panasonic KX-TCD735ALM User Manual

Page 16: Terminating a call

Advertising
background image

Basic Start-up Operations

16

with the Handset
Making a Call

For further information on making calls with the handset, see page 19.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.

Press

then dial a phone number.

After a few seconds, the display will start showing the length of the call.

If you misdial, press

and start over again.

The dialled number is automatically stored into the redial list (p. 19).

Answering a Call

For further information on answering calls with the handset, see page 23.
Make sure that the power is ON (p. 15), otherwise the handset will not ring.

Press or any

keypad,

(0) to (9), (INT), , or —Any

Key

Answer.

After a few seconds, the display will start showing the length of the call.

Terminating a Call

Press

or place the handset on the base unit.

The handset will return to the standby mode.

1

Press

then enter a phone number.

OR
Enter a phone number then press

.

The speakerphone indicator (

) lights.

The dialled number is displayed.

If you misdial, press

then dial again.

After a few seconds, the display will start
showing the length of the call.

For best performance on digital speakerphone

Talk alternately with the caller in a quiet room.

If the other party has difficulty hearing you, press

to decrease the speaker volume.

If the other party’s voice from the speaker cuts in/out during a conversation, press

to decrease

the speaker volume.

with the Base Unit
Making a call (Digital Speakerphone)

For further information on making calls with the base unit, see page 22.

2

When the other party answers, talk into
the microphone.

3

To hang up, press

.

The speakerphone indicator (

) goes out.

The base unit speakerphone cannot be used
while a handset is in use. Wait until the in use
indicator (

) goes out.

Answering a Call

If you subscribe to a Caller ID service, the caller information will be displayed after the first ring (p. 26).

1

Press .

2

Talk into the MIC.

3

To hang up, press

.

After a few seconds, the display will start showing the length of the call.

KX-TCD735ALM(E)-1(02~31) 2002.06.21 4:48 PM Page 16

Advertising