Panasonic KX-TCD735ALM - Manual (Page 19)

19
Chapter 2
Cordless T
elephone
Making Calls
To redial the last number
dialled
Press then or .
OR
Press or then .
•
The last number dialled is automatically redialed.
To redial with the redial list
1 Press .
•
The last number dialled is displayed.
2 Press or until the arrow points to
the phone number you desire to call.
•
To exit the redial list, press .
3 Press or .
•
The selected number is automatically
redialled.
To clear a phone number
in the redial list
1 Press .
•
The last number dialled is displayed.
1 Enter a phone number.
•
The entered number is displayed.
•
To cancel, press and hold (C) or press
.
2 Press or .
•
“ ” is displayed.
•
After few seconds, the display will start
showing the length of the call.
3 Press or place the handset on the
base unit to hang up.
•
The handset will return to the standby
mode.
2 Press or until the phone number you
desire to clear is displayed, then press .
•
To exit the redial list, press .
3 Press or until the arrow points to
“ C l e a r ”, then press .
4 Press or to select “ Y E S ”, then
press .
•
“ CLEARED ” is displayed.
To clear all phone numbers in
the redial list
1 Press then .
2 Press or until the arrow points to
“ A l l C l e a r ”, then press .
3 Press or to select “ Y E S ”, then
press .
•
“ C L E A R E D ” is displayed.
with the Handset
For basic making a call operation with the handset, see page 16.
Making a Call after Confirming the Entered Phone Number
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
Redial Call
The unit automatically stores the last 10 dialled phone numbers into redial list. If the redial list is empty, “ No
Stored Memory ” is displayed when you press . If you press then for redial call and the
other party is in busy, the unit will call back automatically at least every 40 seconds up to 12 times –Auto Redial.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
KX-TCD735ALM(E)-1(02~31) 2002.06.21 4:48 PM Page 19