Panasonic KX-TCD735ALM - Manual (Page 41)

41
Chapter 2
Cordless T
elephone
1 Press twice to enter the base unit
phonebook.
•
The first item is displayed.
2 Press or until the arrow points
to the item you desire to edit.
3 Press .
4 While “ Edit ” is at the arrow, press .
•
If you do not need to change the name, go
to step 6.
5 Edit the name up to 16 characters with
the keypad,
, or
(p. 35).
6 Press .
•
If you do not need to change the number,
go to step 8.
C
7 Edit the number with the keypad ,
or .
•
Pressing erases the digit to the left of
the cursor. To erase all digits, press and
hold .
8 Press .
9 Press to select “ Start ”, then start
recording after a long beep. When finish
recording, press
.
•
If you do not need to record then select
“
Skip ”, forwarded sound remains if
recorded.
•
If you do not need to record then select
“
No Sound ”, forwarded sound is erased
if recorded.
10 While “ Save ” is at the arrow, press .
•
A beep sounds and “ Saved ” is displayed.
•
To return to the standby mode, press
or wait for 60 seconds.
C
C
C
with the Handset
Editing an Item in the Base Unit Phonebook
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
5 Press or to select “ YES ”, and
press .
•
A beep sounds and “ CLEARED ” is
displayed.
•
After a few seconds, the display will show
the next item.
•
To return to the standby mode, press
or wait for 60 seconds.
Clearing an Item in the Base Unit Phonebook
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press twice to enter the base unit
phonebook.
•
The first item is displayed.
2 Press or until the arrow points
to the item you desire to clear.
3 Press .
4 Press or until the arrow points
to “ Clear ”, then press .
•
“ Clear ? ” is displayed.
H
E d i t
C l e a r
A u d i b l e C a l l
KX-TCD735ALM(E)-2(32~49) 2002.06.21 5:02 PM Page 41