Panasonic KX-TCD735ALM - Manual (Page 64)

64
Other Option
with the Handset
Selecting the Battery Type
Two Nickel Metal-hydride (Ni-MH) batteries are included with this unit. Nickel Cadmium (Ni-Cd)
rechargeable batteries can also be used. If you replace the batteries with Ni-Cd batteries, you must
set the battery type selection to “
Ni-Cd ”, or the battery strength will not be displayed correctly. The
factory preset is “Ni-MH”.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Other Option”, then press .
4 Press or until the arrow points
to “Battery Type”, then press .
•
The current battery type is at the arrow.
5 Press or to select “Ni-Cd” or
“Ni-MH”, then press .
•
The display will return to the “Battery
Type
”. To return to the standby mode,
press or wait for 60 seconds.
•
Incorrect battery type selection may shorten
battery life.
In “ Other Option ” menu, Changing the 4-digit handset PIN (p. 52), To set the auto talk
feature ON/OFF (p. 21) are also available.
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 64