Panasonic KX-TCD735ALM - Manual (Page 54)

54
with the Handset
Selecting the Ringer Type for Time Alarm
You can select one of 20 ringer types for the time alarm. The factory preset is type 1.
Make sure the the power is ON (p.15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “ Setting Handset ”, then press
.
3 Press or until the arrow points
to “ Ringer Option ”, then press .
4 Press or until the arrow points
to “ Alarm Type ”, then press .
•
The arrow points to the current setting.
5 Press or to select the desired
ringer type.
•
Each time you press a button, the selected
ringer type sounds.
6 Press .
•
A beep sounds.
•
The display will return to “ Alarm Type ”.
To return to the standby mode, press
or wait for 60 seconds.
A l a r m T y p e
H R i n g e r 1
R i n g e r 2
•
You can exit the programming mode any time
by pressing
.
To stop the time alarm
When the alarm sounds and “ Time Alarm ” is displayed, press any keypad to , ,
or .
•
After 30 seconds, the alarm will stop ringing and the display returns to the standby mode.
•
If “ Once ” is selected, the setting is automatically turned off. If “ Repeat Daily ” is selected, the
setting remains and the alarm will repeatedly sound at the set time.
•
If the unit is in the talk, speakerphone or intercom mode during the alarm time, the alarm will not
sound. After finishing a conversation, the alarm will start ringing.
•
If the alarm sounds during charging, the alarm will stop ringing when you lift the handset from the
cradle.
9 0
Time Alarm
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 54