Storing caller list information – Panasonic KX-TCD735ALM User Manual

Page 31

Advertising
background image

31

Chapter 2

Cordless T

elephone

with the Handset

Storing Caller List Information into the Handset
Phonebook

You can store the Caller List information into the phonebook. You can categorise the caller information
in the phonebook up to 9 categories, then you can select one of 3 display backlight colours and one of
20 ringer types for each private category–Private Category Feature (p. 33).
Make sure that the power is ON (p. 15), and the unit is in the standby mode.

1

Press or .

The most recent caller’s information is
displayed.

2

Press

repeatedly to search from the

most recent call or press

repeatedly

to search from the oldest call until the
arrow points to the caller information
you desire to store.

3

Press .

4

While “

Save Phonebook

” is at the

arrow, press

.

The display shows the number of
remaining phonebook items, then

<Enter name>

”.

5

Enter the name up to 16 characters with
the keypad,

,

or

.

To select characters, see page 35.

If the phone number requires editing, press

and see step 5 on page 29. When

finished, press

then go to step 7.

6

Press twice.

C

7

Press

or

to select the desired

private category number 1 to 9 or OFF,

then press

.

8

While “

Save

” is at the arrow, press

.

A beep sounds and “

Saved

is displayed.

The display will return to caller list. You can
continue the storing procedure begin with
step 3. To return to the standby mode,
press

or wait for 60 seconds.

If a pause is required for dialling, press

.

A pause can be stored in a phone number
counting as a digit (p. 48).

You can exit the programming mode any time
by pressing

.

If the display shows “

Memory Full

” in step

3, the display will return to the standby mode.
You must clear the other caller information in
the phonebook (p. 38).

< E n t e r N a m e >

0 1 2 3 4 5 6 7 8 9

KX-TCD735ALM(E)-1(02~31) 2002.06.21 4:48 PM Page 31

Advertising