Panasonic KX-TCD735ALM - Manual (Page 77)

77
Chapter 5
Answering System
Summary of Direct Command for Answering System Operations (Handset)
See the corresponding pages for function details.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
<Standby mode>
B a s e 1 [ A ]
4 M e s s a g e s
0 N e w C a l l s
Press (INT) then .
•
lights and voice guidance is heard from the speaker.
•
Message information is displayed for 2 seconds, then function menu is displayed.
•
A brief voice guidance indicates the number of new message received, then you can
hear “Press 4 to playback new messages” and “Press 5 to playback all messages.”
<Direct command>
Press To repeat a recorded message during playback* (p. 82)
Press To skip a recorded message during playback* (p. 82)
Press To select the receiver volume during playback (p. 84)
Press To playback new recorded message(s) (p. 80)
Press To playback all recorded message(s) (p. 80)
Press To playback a greeting message (p. 17, 79)
Press To record a memo message (p. 82)
Press To record a greeting message (p. 78)
Press To set the answering system ON (p. 17, 79)
Press To stop playing/recording message (p. 78, 82, 83)
Press To set the answering system OFF (p. 17, 79)
Press To erase one recorded message* (p. 80)
Press To erase all recorded message(s) (p. 81)
Press To erase the recorded greeting message** (p. 79)
1
2
3
4
5
6
7
7
4
6
8
9
0
4
5
6
ON ON
ALL
ALL
OFF OFF
* These functions are available only during recorded message playback.
** This function is available only during your own greeting message playback.
•
If each operation procedure is not completed within 30 seconds, the display will return to standby
mode.
KX-TCD735ALM(E)-4(76~100) 2002.06.21 5:30 PM Page 77