Panasonic KX-TCD735ALM - Manual (Page 75)

75
Chapter 4
Programmable Functions on the Base Unit
Reset Base Unit Settings
1 Press .
2 Press or until the arrow points
to “ Setting Base ”, then press .
•
“ Input Command ” is displayed.
3 Press , then enter the 4-digit base
unit PIN (p. 67).
0
4 Press .
•
A beep sounds.
•
The display will return to “ Setting
Base ”. To return to the standby mode,
press .
•
You can exit the programming mode any time
by pressing
.
This function enables the base unit to reset the following settings at one time. They will return to their
initial settings.
I n p u t C o m m a n d
12 - - - - - - - - - - - -
Ringer mode selection All handsets
Number of rings 3
(Selected then all handsets)
Flash timing
100msec
Pause timing 3 seconds
Call restricted All clear
handset(s)
Function Initial setting
Call restriction All clear
number(s)
4-digit base unit PIN
0000
Base unit ringer volume 2 (MEDIUM)
Base unit ringer type 1
Key tone ON
Function Initial setting
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
with the Handset
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 75