Panasonic KX-TCD735ALM - Manual (Page 59)

59
Chapter 3
Programmable Functions on the Handset
Display Option
Selecting the Standby Mode Display
You can select whether to display the currently connected base unit number, handset number or no
display in the standby mode. The factory preset is the base unit number.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “ Setting Handset ”, then press
.
3 Press or until the arrow points
to “ Display Option ”, then press .
4 While “ Standby Display ” is at the
arrow, press .
•
The arrow points to the current setting.
5 Press or to select “ Base
Number ”, “ Handset Number ” or
“ OFF ”, then press .
•
A beep sounds.
•
The display will return to “ Standby
Display ”. To return to the standby
mode, press or wait for 60
seconds.
•
You can exit the programming mode any time
by pressing
.
Ex. “ Handset Number ” is selected.
Ex. “ OFF ” is selected.
I N T . 1
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0
Ex. “ Base Number ” is selected.
B a s e 1
1 0 N e w C a l l s
2 5 . 0 4 1 5 : 0 0
In “ Display Option ” menu, To select the display backlight colour for the private category
(p. 33) is also available.
with the Handset
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 59