Panasonic KX-TCD735ALM - Manual (Page 70)

70
Base Unit Ringer Volume/Type
Selecting the Base Unit Ringer Volume
4 levels (HIGH, MEDIUM, LOW, OFF) are available. The factory preset is MEDIUM. When set to OFF,
the base unit will not ring.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “ Setting Base ”, then press .
•
“ Input Command ” is displayed.
3 Press TWICE.
•
The current ringer type number is
displayed.
1: LOW 2: MEDIUM 3: HIGH 0: OFF
2
4 Select your desired ringer volume 0
through 3 with keypad
through .
•
Each time you press a button, the selected
volume level is displayed and rings.
Ex. 3 (HIGH) is selected.
5 Press .
•
A beep sounds.
•
The display will return to “ Setting
Base ”. To return to the standby mode,
press .
3 0
I n p u t C o m m a n d
12 22 5 3 7 5 9 0
Selecting the Base Unit Ringer Type
You can select the one of the 6 base unit ringer types. The factory preset is type 1.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points
to “ Setting Base ”, then press .
•
“ Input Command ” is displayed.
3 Press then .
•
The current ringer type number is
displayed.
3 2
4 Select your desired ringer type 1 through 6
with keypad
through .
•
Each time you press a button, the selected
ringer type number is displayed and rings.
Ex. Ringer type 4 is selected.
5 Press .
•
A beep sounds.
•
The display will return to “ Setting Base ”.
To return to the standby mode, press .
6 1
I n p u t C o m m a n d
12 23 5 4 7 5 9 0
with the Handset
KX-TCD735ALM(E)-3(50~75) 2002.06.21 6:23 PM Page 70