Panasonic KX-TCD735ALM - Manual (Page 61)

61
Chapter 3
Programmable Functions on the Handset
1 Press .
2 Press or until the arrow points to
“ Setting Handset ”, then press .
3 Press or until the arrow points
to “ Display Option ”, then press .
4 Press or until the arrow points to
“ Select Language ”, then press .
•
The arrow points to the current setting.
5 Press or to select the desired
language, then press .
•
A beep sounds.
•
The display will return to “ Select
Language ”. To return to the standby
mode, press or wait for 60
seconds.
•
You can exit the programming mode any time
by pressing
.
with the Handset
Selecting the Display Language
You can choose one of 20 display languages. The factory preset is English.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
Selecting the Display Backlight Colour
You can set the display backlight colour to green, orange, or red. The display backlight will light in the
selected colour when pressing a button, lifting the handset from the base unit or receiving a call.
The factory preset is green.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points to
“ Setting Handset ”, then press .
3 Press or until the arrow points to
“ Display Option ”, then press .
4 Press or until the arrow points to
“ Backlight Color ”, then press .
•
The arrow points to the current setting.
5 Press or to select the desired
display backlight colour.
•
Each time you press or , the
display backlight colour will change from
green, orange to red on the handset.
6 Press .
•
A beep sounds.
•
The display will return to “ Backlight
Color ”. To return to the standby mode,
press or wait for 60 seconds.
•
You can exit the programming mode any time
by pressing
.
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 61