Panasonic KX-TCD735ALM - Manual (Page 23)

23
Chapter 2
Cordless T
elephone
Selecting the Receiver Volume (HIGH, MEDIUM or LOW) or
Speaker Volume (6 levels) During Conversation
Press to decrease volume, or press to increase volume.
•
Each time you press or , the volume level will change.
•
The display will return to the talk mode after receiver/speaker volume selection.
Answering Calls
with the Handset
For basic answering a call operation with the handset, see page 16. During a call using the base unit
speaker, the call can be switched to the handset when the handset is lifted up from the base unit cradle.
If you subscribe to Caller ID service, the caller information will be displayed after the first ring (p. 26).
Make sure that the power is ON (p. 15), otherwise the handset will not ring.
Ex. Receiver volume: HIGH
R e c e i v e r V o l u m e
L O W 1 2 3 4 5 6 H I G H
Temporary Ringer/Monitor OFF
1 Press and hold for 1 second while handset is ringing/answering.
•
The handset stops ringing and “ Ring Off ” is displayed.
2 Press or any keypad, (0) to (9), (INT), , or to answer a call (–Any
Key Answer).
•
After a few seconds the display will start showing the length of the call.
•
This function is not available when the handset is on the base unit.
•
This function is for external call only.
Auto Talk (p. 21)
If you set the auto talk feature ON, you can answer a call by lifting the handset off the base unit
without pressing
.
Display Backlight
The lighted display will stay on for about 10 seconds after pressing a handset button or lifting the
handset off the base unit. You can select one of 3 display backlight colours, green, orange, or red
(p. 61).
KX-TCD735ALM(E)-1(02~31) 2002.06.21 4:48 PM Page 23