Panasonic KX-TCD735ALM - Manual (Page 60)

Display Option
60
1 Press .
2 Press or until the arrow points to
“ Setting Handset ”, then press .
3 Press or until the arrow points to
“ Display Option ”, then press .
4 Press or until the arrow points to
“ Talk Display ”, then press .
“ Talk Time ”: Length of the call
“ Phone No. ”: Dialled phone number
•
The arrow points to the current setting.
5 Press or to select “ Talk Time ”
or “ Phone No. ”, then press .
•
A beep sounds.
•
The display will return to “ Talk Display ”.
To return to the standby mode, press
or wait for 60 seconds.
“ Phone No. ” is selected.
(Ex. 123-456-7890)
with the Handset
Selecting the Talk Mode Display
You can select whether to display the length of the call or the dialled telephone number while in the
talk mode. The factory preset is set to show the length of the call.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
•
You can exit the programming mode any time
by pressing
.
During a conversation, the display will be as
follows.
“ Talk Time ” is selected.
(Ex. 1 hour, 30 minutes, 40 seconds.)
1 2 3 4 5 6 7 8 9 0
0 1 - 3 0 - 4 0
KX-TCD735ALM(E)-3(50~75) 2002.06.21 8:29 PM Page 60