Panasonic KX-TCD735ALM - Manual (Page 82)

Answering System Operations with the Handset
82
During Playback of a Recorded Message
To repeat a message
Press to display “ Repeat Msg ”, then
press .
OR
Press
.
•
If you press within 5 seconds from start
playback, the previous message will be played.
•
If you press over 5 seconds from start playback,
the current message will be played.
1
To skip a message
Press . Press or until the arrow
points to “ Skip Msg ”, then press .
OR
Press
.
•
The next message will be played if recorded.
2
To stop a message
Press . Press or until the arrow
points to “ Stop ”, then press .
OR
Press
.
•
The display will return to “ Remote Operation ”. To return
to the standby mode, press or wait for 30 seconds.
9
To record a memo message
with direct command
1 Press (INT) then .
2 Press then .
3 After the long beep, talk clearly, about
20 cm away from the MIC (microphone)
on the handset.
•
The display will start showing the length of
the recording time.
4 When finish recording, press .
•
A beep sounds.
•
The display will return to “ Remote
Operation ”. To return to the standby
mode, press or wait for 30
seconds.
9
4 7
To record a memo message
with function menu
1 Press (INT) then .
2 After the function menu is displayed,
press or until the arrow points to
“ Record ”, then press .
3 Press or to select “ Record
Memo ”, then press .
4 After the long beep, talk clearly, about
20 cm away from the MIC (microphone)
on the handset.
•
During recording, the arrow points to “ Stop ”.
5 When finish recording, press .
•
A beep sounds.
•
The display will return to “ Remote
Operation ”. To return to the standby
mode, press or wait for 30 seconds.
R e c o r d
A n s w e r O N
H
S t o p
R e m o t e O p e r a t i o n
74
0 0 - 0 0
KX-TCD735ALM(E)-4(76~100) 2002.06.21 5:30 PM Page 82