Panasonic KX-TCD735ALM - Manual (Page 65)

65
Chapter 3
Programmable Functions on the Handset
Time alarm mode OFF
Alarm time Clear
Handset ringer volume 3 (MEDIUM)
External ringer type 1
Internal ringer type 1
Paging ringer type 1
Private ringer type 1
Alarm type 1
Key tone ON
Call waiting tone ON
Range warning alarm OFF
Battery low alarm ON
Audible caller ring OFF
Standby mode display Base unit number
Reset Handset Settings
Function Initial setting
Talk mode display Length of the call
Call prohibition mode OFF
Display language English
Backlight colour Green
Private colour Green
Direct call number Clear
Direct call mode OFF
4-digit handset PIN 0000
Auto talk OFF
Base unit access Automatic base
unit access
Handset receiver volume MEDIUM
Redial memory All clear
Function Initial setting
1 Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Reset Handset”, then press .
4 Enter the 4-digit handset PIN (p. 52).
•
“Reset Handset” is displayed.
5 Press or to select “YES”.
6 Press .
•
A beep sounds and “CLEARED” is
displayed.
•
The display will return to “Reset
Handset
”. To return to the standby
mode, press or wait for 60
seconds.
•
You can exit the programming mode any time
by pressing
.
E n t e r H / s e t P I N
1 2 3 4 5 6 7 8 9 0 0 : ----
This function enables the handset to clear the following setting at one time. They will return to their
initial settings.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
with the Handset
KX-TCD735ALM(E)-3(50~75) 2002.06.21 5:24 PM Page 65