Panasonic KX-TCD735ALM - Manual (Page 44)

44
Phonebook
with the Handset
Hot Key Dial
The keypad 1 to 9 function as one-touch dials. You can assign up to 9 caller’s information in the
phonebook as hot key dial. This information can be assigned to keypad 1 to 9.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
To store an item as hot key
dial
1 Follow steps on Finding an Item in the
Handset Phonebook (p. 39), then press
.
2 Press or until “ Reg. To Hot
Key ” is displayed, and press .
•
If already stored, “ ” will be displayed on
the left of the hot key number.
3 Press or to select a hot key
number, then press .
4 Press or until “ Save ” is
displayed.
OR
If the hot key number with “
” is
selected, press or until
“ Overwrite ” is displayed.
5 Press .
•
A beep sounds and “ Saved ” is displayed.
•
After a few seconds, the display will show
the next caller information.
•
To return to the standby mode, press
or wait for 60 seconds.
To make a call with hot key
dial
1 Press and hold a hot key number 1 to 9.
•
The stored caller information is displayed.
2 Press or .
•
The number is automatically dialled.
3 To hang up, press .
To clear a caller information in
the hot key dial
1 Press and hold a hot key number 1 to 9.
•
The stored caller information is displayed.
2 Press .
3 Press or until the arrow points
to “ Clear ”, then press .
•
“ Clear ? ” is displayed.
4 Press or to select “ Yes ”, then
press .
•
A beep sounds and “ CLEARED ” is
displayed.
•
“ No Stored Memory ” is displayed if
clear all hot key dial.
R e g . T o H o t K e y
H K e y 1
K e y 2
KX-TCD735ALM(E)-2(32~49) 2002.06.21 5:02 PM Page 44