Cable running to the mdfm, Figure 006-5 – NEC NEAX2000 IVS ND-45492 User Manual
Page 101
Advertising
CHAPTER 3
ND-45492 (E)
Page 84
Revision 2.0
3. Cable Running to the MDFM
(1) Connect the champ connector of each MDF cable to an LTC connector located on a PIM using the screws
provided, as shown in
(2) Pare the sheath of each MDF cable and secure the shield to the front bracket on the PIM using tie wraps,
as shown in
Figure 006-5 Cable Running to the MDFM
NAP 200-006
Sheet 6/7
Cable Running to the MDF
25 ~ 30 mm
(1.0 ~ 1.2 inch)
MDF CABLE
TIE WRAP
SHIELD
PIM
FRONT
TO STATION, etc.
PBX
LTC CONNECTOR
CHAMP CONNECTOR
PIM
MDFM
BASE
Advertising