Nap 200-006 cable running to the mdf, Mdf cable, Nap 200-006 – NEC NEAX2000 IVS ND-45492 User Manual
Page 96: Cable running to the mdf, Figure 006-1, Nap- 200-006
Advertising
ND-45492 (E)
CHAPTER 3
Page 79
Revision 2.0
1. MDF Cable
To facilitate the termination of the 25 pair cables (MDF cables) from the system to the MDF shown in
, the length of each cable to be used should be predetermined according to the distance between the MDF
and the system. Each cable should be labeled at both ends using a cable number or cable designation as shown
in
Figure 006-1 MDF Cable
NAP 200-006
Sheet 1/7
Cable Running to the MDF
TO PIM
CHAMP CONNECTOR
TO MDF
TWISTED 25 PAIR CABLES
Advertising