NEC NEAX2000 IVS ND-45492 - Manual (Page 171)

CHAPTER 3 ND-45492 (E)
Page 154
Revision 2.0
Confirm the entered system data and hardware, including cable connection, by completing the following oper-
ational tests.
• Basic Connection Test at MDF
• Station Line Test (Operator Call from all stations)
• Central Office Trunk Test (Incoming, Outgoing)
• Tie Line Trunk Test (Incoming, Outgoing)
• Service Feature Test
• Call Transfer
• Step Call
• Executive Right of Way
• Call Hold
• Call Back
• Call Forwarding-All Calls/Don’t Answer/Busy Line
• Call Pickup
• Station Hunting-Pilot/Circular
• Speed Calling-System/Station
• Paging Access
• Announcement Service
• etc.
NAP 200-011
Sheet 1/1
Operation Test