NEC NEAX2000 IVS ND-45492 - Manual (Page 161)

CHAPTER 3 ND-45492 (E)
Page 144
Revision 2.0
(5) Install the Card Stopper according to the following procedure.
(a) Insert the left side of the Card Stopper to the slot for the card Stopper as shown in Fig. A of Figure
008-3 .
(b) Loosen the attached screw for the Card Stopper, and hang the right side of the Card Stopper onto the
screw. Then, tighten the screw as shown in Fig. B of Figure 008-3 .
Figure 008-3 Installation of the Card Stopper
NAP 200-008
Sheet 3/3
Mounting of Circuit Cards
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
–
+
CARD STOPPER
SLOT
CARD STOPPER
CIRCUIT CARD
Fig. B
SCREW
Fig. A
PZ-PW86
Fig. A
PIM
Fig. B