NEC NEAX2000 IVS ND-45492 - Manual (Page 66)

ND-45492 (E) CHAPTER 3
Page 49
Revision 2.0
(3) Attach four M4 machine screws (provided) to the RACK PARTS as shown in Figure 003-21 .
For proper mounting of each PIM, approximately 4 mm (0.2 inch) spacing should be provided between the
inner face of the M4 machine screw and the RACK PARTS front channel. See
Figure 003-23 .
(4) Align and insert the key hole slots of the rear cover of each PIM to the machine screws secured in step (3).
See Figure 003-23 .
Figure 003-23 Mounting the PIM to the RACK PARTS
NAP 200-003
Sheet 27/37
Installation of Main Equipment
(PIM)
APPROX. 4 mm (0.2 inch)
(WALL)
SCREW-A (x 4)
RACK PARTS
M4 MACHINE SCREW-B (x 4)
(REAR COVER)
(LOCALLY PROVIDED)
(PROVIDED WITH RACK PARTS)