NEC NEAX2000 IVS ND-45492 - Manual (Page 80)

ND-45492 (E) CHAPTER 3
Page 63
Revision 2.0
(3) Set the switch located inside the console according to the type of headset/handset connected. Refer to Fig-
ure 004-4 .
Figure 004-4 Switch Setting on the SN610 ATTCON (1 of 2)
NAP 200-004
Sheet 4/12
Installation of Peripheral Equipment
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
• Slide the directory out of the way.
Then insert a flat screw driver’s blade into the notched opening and apply light upward pressure
until the access panel is clear of the front lip. At the same time apply pressure (toward you) at
the rear of the pedestal to move the access panel.
ACCESS PANEL
DIRECTORY