Safety considerations – NEC NEAX2000 IVS ND-45492 User Manual
Page 12
ND-45492 (E)
SAFETY CONSIDERATIONS
Page vii
Revision 2.0
SAFETY CONSIDERATIONS
IMPORTANT — SAVE THESE INSTRUCTIONS
(1)
Never install telephone wiring during a lightning storm.
(2)
Never install telephone jacks in wet locations unless the jack is specifically designed for wet loca-
tions.
(3)
Never touch uninsulated telephone wires or terminals unless the telephone line has been discon-
nected at the network interface.
(4)
Use caution when installing or moving telephone lines.
When using your telephone equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and injury, including the following:
(5)
Read and understand all instructions.
(6)
Follow all warnings and instructions marked on the product.
(7)
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
(8)
Do not use this product near water; for example, under water pipes near a bath tub, sink, or laun-
dry tub, in a wet basement, or near a swimming pool.
(9)
Do not place this product on an unstable cart, stand, or table. The product may fall, causing seri-
ous damage to the product.
(10)
Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect
it from overheating. These openings must not be blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should
never be placed near or over a radiator or heat register. This product should not be placed in a
built-in installation unless proper ventilation is provided.
(11)
This product should be operated only from the type of power source indicated on the marking la-
bel. If you are not sure of the type of power source available, consult with your local power com-
pany.
(12)
This product normally connected with a three wire grounding type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding type plug.
(13)
Do not allow anything to rest on the power cord. Do not locate this product where the cord will be
abused by persons walking on it.
(14)
Do not overload wall outlets and extension cords as this can result in the risk of fire or electric