NEC NEAX2000 IVS ND-45492 - Manual (Page 45)

CHAPTER 3 ND-45492 (E)
Page 28
Revision 2.0
(5) Mount the PIM on the BASE, and connect them together using 3 bolts (provided). Refer to Figure 003-6 .
Note: The PIM must be mounted over the 4 RACK PART screws previously installed in step 2(b).
Figure 003-6 Mounting of the PIM
NAP 200-003
Sheet 6/37
Installation of Main Equipment
FRONT
BASE
PIM Note
Note: The Battery Module (BATM) and/or the MDF Module (MDFM) can be installed in the same man-
ner as the PIM.