NEC NEAX2000 IVS ND-45492 - Manual (Page 160)

ND-45492 (E) CHAPTER 3
Page 143
Revision 2.0
(3) Before mounting the circuit cards, confirm the following items.
• Wrist Strap is connected to Frame Ground.
• Switch setting of circuit cards is already completed (Refer to the Circuit Card Manual).
• The “SW1” switches of all PZ-PW86 Cards are turned off.
(4) Mount circuit cards into their mounting positions according to the “Bay Face Layout” and “Port Assign-
ment Table” given in the System Data Sheet.
Figure 008-2 shows the mounting method of circuit cards.
Figure 008-2 Mounting of the Circuit Cards
NAP 200-008
Sheet 2/3
Mounting of Circuit Cards
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
CARD FRONT SIDE CARD CONTACT SIDE
WRIST STRAP
TO FRAME GROUND CONNECTION
(
SEE FIGURE 3-1 )