RAD Data comm ASMi-52 - Manual (Page 138)

Appendix B IR-IP Interface Module Installation and Operation Manual
B-2 Technical Specifications ASMi-52 Ver. 2.5
Application
Figure B-1 shows a typical application of the ASMi-52 unit equipped with the IR-IP
interface module.
Figure B-1. Typical Application of the ASMi-52 Unit with IR-IP
B.2 Technical Specifications
Router Local IP Net Capacity Supports up to 256 hosts on the local LAN IP net
Filtering Rate 35,000 packets per second IR-IP: technical
specifications
Forwarding Rate 30,000 packets per second
Buffer 256 frames (maximum size – 1534 bytes)
Delay 1 frame
Configuration Telnet, through the 10BaseT interface
LAN Standard Conforms to IEEE 802.3
Data Rate 10 Mbps (20 Mbps for 10BaseT in full duplex mode)
Interface Type 10BaseT for use on UTP and STP media, terminated
in RJ-45 shielded 8-pin connector
Operation Mode Full duplex or half duplex user-selectable
WAN Protocols • PPP (PAP/CHAP)
• Frame Relay (RFC 1490)
• HDLC-like framing