RAD Data comm ASMi-52 - Manual (Page 175)

Installation and Operation Manual Index
ASMi-52 Ver. 2.5 I-3
reset to default values, B-22
Reset WAN, B-23
resetting, B-22
static groups, B-19
statistics, B-25
technical specifications, B-2
—L—
LAN
Aging timeout, 4-9
autonegotiation, 4-12
Configuration, 4-7
fault indication, 4-12
rate, 4-10
LEDs, 1-12
front panel, 3-3, 6-8
IR-IP, B-4
test, 6-24
Line interface, 1-1, 1-4, 1-13
Line Interface
SHDSL, 1-12
LLB/RLB
activation, 5-4
Log file, 6-10
Logging out, 3-15
Loopback, 1-14
activating, 6-19
clearing, 6-24
deactivating, 6-24
local, 1-14, 6-20
mux units, 6-20
remote, 1-14, 6-22
repeater test, 6-23
tests, 6-19
Low speed mode, 4-16
—M—
Management, 1-9, 3-9
ConfiguRAD, 1-9, 3-9
RADview, 1-9
Management access
controlling, 4-4
Management parameters
configuration, 4-1
Management port
10/100BaseT, 1-12
Ethernet port, 1-14
V.24/RS-232 control port, 1-14
Management utility
IR-IP, B-9
menu structure, B-10
starting, B-10
Manager list, 4-3
Map Timeslot, 4-5
Menus
BERT, 6-18
BERT pattern, 6-18
BERT Performance, 6-18
BERT results, 6-19
configuration, 4-13
control port, 4-16
control port rate, 4-17
device information, 4-2
diagnostics, 6-21
DTE configuration, 5-4
DTE local port, 5-5
DTS configuration, 4-5
E1 local port, 4-29
E1 port performances, 6-5
E1 sync mode, 4-31
factory default, 4-47
framed mode, 4-30
host IP, 4-3, 5-3
inventory, 4-42
inventory and configuration, 3-12
LAN Configuration, 4-7
local reset, 4-49
local/remote test, 6-22
main, 4-41
management, 4-1
management access, 4-4
manager list, 4-3
master clock, 4-14
master clock (internal), 5-2
monitoring, 4-37, 6-9
navigating the management, 3-8
physical port statistics, 6-1
physical port status, 4-39, 6-11
port status, 4-39
repeater reset, 4-49
repeater test, 6-24
reset, 4-48
SHDSL local port, 4-23
SHDSL port performances, 6-2
SHDSL remote port, 4-23
Snext margin, 4-24
sync mode, 4-31
system configuration, 4-14
system monitoring, 6-10
terminal, 4-19
TFTP, 4-43
timeslots mapping, 4-33
typical data rate, 4-28
Modem glue logic, 1-12
Monitoring
performance, 6-1
Multiplexer
conditions, 1-7
—N—
Normal indications, 3-3, B-4
service, B-4
—O—
Operating temperature, 2-2
—P—
Package Contents, 2-2
Password, 4-40