RAD Data comm ASMi-52 - Manual (Page 50)

Chapter 3 Operation Installation and Operation Manual
3-14 Turning Off ASMi-52 ASMi-52 Ver. 2.5
Logging Out
To end the current session:
• In the Main menu, click Logout or type & in a terminal management screen.
• • ASMi-52 allows at least four management sessions to be active at a time. If the
Web-based management sessions were not ended properly (for example, by
closing the Web browser window), you have to wait five minutes before
attempting the next log-in. If you try to log in during the five-minute security
timeout, ASMi-52 does not allow to proceed to the Main menu, displaying ‘Too
Many Users’ message. Likewise, the Web-based management session cannot be
initiated, if a terminal or Telnet session is still in progress.
• One session is always reserved as a terminal session from the four available
management sessions, the other three sessions can be a ConfiguRAD or Telnet
sessions. The four sessions can function at the same time.
3.5 Turning Off ASMi-52
To turn off ASMi-52:
• Remove the power cord from the power source.
Note