RAD Data comm ASMi-52 - Manual (Page 97)

Installation and Operation Manual Chapter 4 Configuration
ASMi-52 Ver. 2.5 Additional Tasks 4-47
2. From the Reset menu, select Local Reset to reset the local modem or Remote
Reset to reset the remote device.
The Local/Remote Reset menu appears (see Figure 4-51 ).
3. From the Local/Remote Reset menu, select Local/Remote Device Reset to
perform the overall reset or select Local/Remote SHDSL Line Reset to reset
the SHDSL interface.
A confirmation message appears.
4. Type Y to confirm the reset.
ASMi-52
Reset
1. Local reset
>
2. Remote reset >
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-50. Reset Menu
ASMi-52
Local Reset
Local Line number
(1)
1. Local device reset
2. Local SHDSL line reset
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-51. Local Reset Menu
Resetting the SHDSL Repeater
You can reset the SHDSL repeater line interface from the local ASMi-52 via the
Reset menu.
To reset the line interface of the SHDSL repeater:
1. From the Reset menu, select Repeater Reset (Main menu > Configuration >
System Configuration > Reset > Repeater Reset).
The Repeater Reset menu appears (see Figure 4-52 ).
2. From the Repeater Reset menu, select Repeater Number.
The Repeater Number menu appears.
3. From the Repeater Number menu, select the repeater that you intend to reset.
4. From the Repeater Reset menu, select Repeater SHDSL Line Reset to reset
the SHDSL line interface of the repeater.
5. Type Y to confirm the reset.